What Cornelius water actually does to a tank
Maintenance advice is usually written for hard water, and most of this region does not have it. Your supply comes from Charlotte Water, and the question worth asking is not how much scale it leaves but how corrosive it is. Soft, lightly buffered water forms no protective film inside the tank lining, so the anode rod is doing the entire job of protecting the steel.
That inverts the standard advice. An annual flush matters less here than it would in a hard-water city, and the anode rod matters far more. A tank that has never had its anode checked at eight years old is running on whatever is left of it, and once that is gone the tank itself starts corroding.
- Anode inspection is the one job on this list that changes how long the tank lasts.
- A T&P test with a pressure reading, because a weeping relief valve is usually pressure rather than a failed valve.
- A flush, with an honest warning first: on a tank over about ten years that has never been flushed, the drain valve frequently will not reseat once opened.
What Cornelius itself changes
The housing in Cornelius
Cornelius is a solid fit for second-cycle water heater work: 24.1% of the stock was built in the 1990s and 32.5% in the 2000s, giving a median build year of 2002. That is a large, consistent cohort of homes whose original units have already been replaced once and whose replacements are now aging out.
Where the heaters sit
Garage and closet installs across the subdivisions, with attic units in the larger lakefront and near-lake homes. Access is generally good.